V2.8
Compatible with DEBIX Model Infiniy

V2.4
Support for ov5640 and gc2145 camera
The default configuration supports ov5640
Command: sudo cp /boot/imx8mp-debix-core-gc2145.dtb /boot/imx8mp-evk.dtb supports gc2145 after reboot
Command: sudo cp /boot/imx8mp-debix-core-ov5640.dtb /boot/imx8mp-evk.dtb supports ov5640 after reboot
Open the camera command cheese -d /dev/video2

V2.3
Added ads1115 module

V2.2
Add panel:
1. 10.1 inch 1280x800 LVDS (JW101HD-X00)
2. 5 inch 800x480 LVDS (JW050R0320I01)
3. 8 inch 800x1280 LVDS (JW080R1120B02)
4. 7 inch 1024x600 LVDS (JW070R0520B02)

V2.1
1. Adjust high temperature reset at 105??
2. Add 1280 x 800 HDMI panel
3. Remove some prints from ASoC

V2.0
1. Add backlight control and power control for 5 inch and 10 inch screen
2. Fix the bug that the resolution switches to 1280x720 when HDMI fails to read EDID
3. Fix the bug that one static IP and one dynamic IP shows on network

V1.9
1. Support 4G module, use script debix_add_on_board to switch to 4G add_on board
2. Run DebixRun4G.sh to start 4G to dial or use the GUI to configure 4G network
3. Fix the bug that two IP occur when configuring Ethernet
4. Delete the function of creating swap area automatically 
5. Delete the debug message about "mass_storage creating"


V1.8
1. Support radar module LDROBOT_LiDAR_LD19, the test command is ldlidar_stl /dev/ttyUSB0
2. Support mounting mmcblock1p1 as a USB stick


V1.7
1. Use python script to substitute dts files
2. Use python script to set up Wi-Fi Access Point
3. Abandon unused services(check command: `systemctl list-units --state=failed`)
4. uboot pull up debug rx, tx pin
5. uboot run command and configuring parameters
6. Add debix-gpio program to control the input and output of GPIO


V1.6
Debix-4G-V1.6-20220705
Debix-yocto-V1.0.02-20220705.img
1. Modify Uboot to open dual Ethernet ports


V1.5
1. Add supporting 10'' LVDS display 1024x600
2. stop connman service(connman-wait-online.service)


V1.4
1. Support Wi-Fi Access Point, click the application "debix wifi ap" in the applications and input username and password to use it.
2. Use otg port as host, USB stick and mouse can be conneted to it.


V1.3
1. light the open-machine LED once the power is on


V1.2
1. fix the bug that the expanded Ethernet port cannot be used(ens34) ----> Modify uboot to fix


V1.1
1. Update the error that the Ethernet IP changes on reboot.


V1.0
1. update the grammar and logic of Add-on Board tool
2. update the audio to 44.1k, turn up the headphone volumn